|
 Counter Surveillance
Probe/Monitor
The
PD/CPM-700 is a broadband receiver designed to detect and locate all
major types of electronic surveillance devices including room,
phone, body bugs, video transmitters, and tape recorders.
Broadband receivers such as the PD/CPM-700 provide a very important
cost-effective tool for professional sweep teams, government
security personnel, and private citizens with important security
needs. The PD/CPM-700 is very effective for rapidly detecting and
locating transmitted signals, while being very easy to learn to use.
The PD/CPM-700 sweep kit includes a custom Cordura case that contains
all items necessary to conduct a professional sweep.
PD/CPM700 Advantages
-
Portable
Sweep Kit - provides everything needed to perform a
professional sweep; fits inside a standard briefcase.
-
Multi-Functional Utility - Comes with probes to
detect RF transmitters (audio and video), carrier current
transmitters, and telephone bugs. Probes also available to
detect for infrared transmitters, tape recorders, and acoustic
leakage.
-
 Wideband
Coverage - from 200Hz to over 3GHz with no holes or
gaps.
-
Monitor
Mode - after a sweep, the alarm monitor (silent or
audible alert) guards against new devices brought in or remote
control activation of surveillance devices.
-
Auxiliary
Audio Input - allows user to listen to telephones or
lines for "hot mikes," hook switch by-pass and "infinity" bugs.
Unknown wires and cables can be tested for wired microphones.
|
PART # |
DESCRIPTION |
COST |
AVAILABILITY |
ADD |
|
PD/CPM-700
Standard |
Counter Surveillance
Probe/Monitor
|
$2,109.09
$2,399.99 |
YES AS OF
FREE SHIPPING |
|
|
PD/CPM-700D
Deluxe |
Deluxe Counter Surveillance
Probe/Monitor See
PDF |
$4,298.09
$5,248.58 |
YES AS OF
FREE SHIPPING |
|
*FREE Ground shipping lower 48 US States ONLY!
Details
PD/CPM700 STANDARD
Includes
the following:
• PD/CPM700 Counter
surveillance Probe/Monitor
• Standard RF Probe
(50kHz-3GHz)
• VLF Carrier Current
Probe
• TVLF Patch Cable
• Auxiliary Patch Cable
• Headphones
• Soft carrying case
This is the most basic
package providing for TSCM RF testing up to 3GHz.
PD/CPM700 DELUXE (intended
for high security sweeps)
Includes
above standard items plus the following:
• Broadband Microwave
Probe:
frequency range of 2GHz-12GHz
(BMP-1200, replaces standard RF
probe), (This probe is
directional and extremely sensitive).
• Acoustic Leakage Probe
for evaluating structural bound
• RF Sniffer Probe
(10MHz-3GHz) for pinpointing surveillance devices where the Standard
RF Probe may become saturated with RF energy
• Infrared Probe
• Magnetic Leakage Probe
• Modular Phone Adapter
for network and phone line testing
• Tape Recorder Patch
Cords
• Cigarette Lighter
Adapter for powering the CPM from a 12VDC automobile socket
• Rechargeable Batteries
PD/CPM-700
Specifications
|
R.F.
Probe:
-
Gain: 20dB nominal Frequency
-
Response: 50kHz-2GHz ±3dB 3GHz-10dB
-
Sensitivity: -62dBm (1 segment)
-85dBm M.D.L.
|
VLF
Probe:
-
Frequency Response: 15kHz-1MHz-3dB
-
MAX input voltage: 300 VAC 50-60Hz
-
Isolation: 1500 VAC 60Hz
-
Sensitivity: -38dBm (1 segment) -60
M.D.L.
|
|
Audio
Amplifier:
-
Input Impedance: 50K Ohm balanced
-
Input Range: 1.7uV-10V (135dB) AGC
-
Dynamic Range: 100dB (high and low
gain)
-
Frequency Response:100Hz- 15kHz±3dB
(filtered) 500Hz-24dB/octave, 2.5kHz-18dB/octave
-
Headphone Output: 5Vp-p 220
-
Record Out: 25 mVp-p nominal with
AGC
|
Display:
-
LCD bar graph: 18 segment with
pulsing single segment trip point
-
50dB dynamic range (1 segment High
Gain to MAX Low Gain)
-
Alert Output: 2.8kHz tone or silent
red LED at 2Hz
-
Remote Output: N.O. contact (300mA
25V MAX)
|
|
Battery:
-
8 ea. MN1500 AA Alkaline - Life
10-16 hrs
-
(Optional) 8 ea. 550mAh NiCad - life
3-5 hrs per charge
-
Low Battery Indicator: approx. 10%
remaining power
|
AC
adapter/Charger:
-
Input: 95-l30VAC 50-60Hz, or
200-275VAC 50-60Hz
-
Output: 12VDC with 500mA NiCad
Recharge Time: 8-10 hrs
|
|
PD/CPM-700
Unit:
|
Carry
Case:
|
|
FREE Shipping on orders over $250.00!*