|
Multi-Channel
Passive Baluns
You can't just connect the wires - you'll lose signal
strength and picture quality. A video balun corrects this
problem by balancing impedance and other electrical
characteristics, which minimizes signal loss and noise.
It's important to use
video baluns when sending video over
Cat5
since the
impedance specifications of Cat5, Cat5e and Cat6 are 100
ohms. Video requires 75 ohm impedance and you'll introduce
artifacts to your video without a balun.
Multi-Channel Passive Baluns
|
Powered
Balun Hub for 4 Cameras
This hub connects power and video signals to RJ-style (RJ45)
connectors for transfer to cameras.
Note: Typical category 5 cable
uses 24 AWG (American Wire Gauge) twisted pair copper wire
and is designed to safely carry 12VDC power required for
most surveillance cameras when configured properly using
pins 4 and 5 of the standard jack (8P8C modular connector).
Always be aware of safety considerations, wire routing
considerations, environmental considerations and voltage
drop after 100 meters when using powered Cat 5 cable.
$51.47
|
|
 4-Channel
Passive Video Balun
This passive video balun
connects up to four BNC coax cables to 8-conductor twisted
pair cables (RJ-45).
-
Compact size, can be screwed
down
-
Transmits color video
signals up to 400 meters (437.4 yards) or b/w video up
to 600 meters (656.2 yards)
-
Distances of up to 1
kilometer when used with
active baluns
-
Built-in noise filter
-
Cost saving: Eliminate long
runs of coaxial cable
-
Category 5 (Cat5) wire
recommended.
$51.47
|
|
4-Channel
Passive Video Balun Receiver
|
Transceiver Type |
4CH Passive Video Balun
Receiver & Power Supply Hub (VPS) |
|
Video |
Frequency Response
Range: DC-5MHz; Common-Mode / Differential-Mode
rejection: 5KHz-5MHz 60dB type |
|
Wire Type |
24-16AWG UTP
Cat5
or
higher; DC loop resistance ≦18Ω/ 100m; Differential
capacitance: 62pF/m (max) |
|
Impedance |
UTP or Connection or
RJ-45: 100Ω; BNC Coax:75Ω |
|
Power Input |
n/a |
|
Power Transmission |
12V DC up to 750 ft Via
UTP Cat5e / 6 |
|
Dimensions |
7.9" x 6.7" x 1.8" |
|
Weight (lb) |
2.3 |
$95.59
|
|
8-Channel
Passive Video Balun Receiver
|
Transceiver Type |
8CH Passive Video Balun
Receiver & Power Supply Hub (VPS) |
|
Video |
Frequency Response
Range: DC-5MHz; Common-Mode / Differential-Mode
rejection: 15KHz-5MHz 60dB type |
|
Wire Type |
24-16AWG UTP
Cat5
or
higher; DC loop resistance ≦18Ω/ 100m; Differential
capacitance: 62pF/m (max) |
|
Impedance |
UTP or Connection or
RJ-45: 100Ω; BNC Coax:75Ω |
|
Power Input |
n/a |
|
Power Transmission |
12V DC up to 750 ft Via
UTP Cat5e / 6 |
|
Dimensions |
11.4" x 6.7" x 1.8" |
|
Weight (lb) |
4.3 lbs |
$154.41
|
|
16-Channel
Passive Video Balun Receiver
|
Transceiver Type |
16CH Passive Video Balun
Receiver & Power Supply Hub (VPS) |
|
Video |
Frequency Response
Range: DC-5MHz; Common-Mode / Differential-Mode
rejection: 15KHz-5MHz 60dB type |
|
Wire Type |
24-16AWG UTP
Cat5
or
higher; DC loop resistance ≦18Ω/ 100m; Differential
capacitance: 62pF/m (max) |
|
Impedance |
UTP or Connection or
RJ-45: 100Ω; BNC Coax:75Ω |
|
Power Input |
n/a |
|
Power Transmission |
12V DC up to 750 ft Via
UTP Cat5e / 6 |
|
Dimensions |
19.4" x 6.7" x 1.8" |
|
Weight (lb) |
7.1 lbs |
$213.24
|
|
|
FREE
