INFRARED TOUCH LESS DOOR SENSOR

This touch less door sensor operates using reflected infrared light. It can activate a door or relay when you wave your hand in front of it.
The sensor works by detecting infrared light at a pulsed frequency that matches the frequency of the emitter LED, built into the front of the device. This eliminates false operations due to infrared coming from nearby infrared sources like surveillance cameras and radiant IR illuminators.

- Sealed construction, safe for outdoor use
- Detection distance: 1.2" to 3.9" (3cm to 10cm)
- Adjustable range and sensitivity
- Encoded signals prevent interference from nearby radiant IR light sources.
- Bicolor LED indicates activity/standby
- Power: 12VDC @ 25mA max. during activation (15mA during standby)
- Can be used with or without included mounting plate
 

Dimensions:
Sensor: .98" x 1.4" (23mm x 35mm)
Mounting plate: 1.5" x 4.5" (38.1mm x 114.3mm)

$58.33

GANG-BOX SIZE PUSH TO EXIT MAGNETIC DOOR LOCK EXIT BUTTON

- Illuminated button (12 VDC)
- Illumination lamp max 60 V 1.2 watts
- Temperature range -20~55
- Contact rating: 3A @ 300 VAC max
- Single pole N.O./N.C. momentary action
- Mechanical life: 1,000,000 cycles min.
- Durable stainless steel plate
- Dimensions: 120x76.2x82mm

$39.94

SMALL PUSH TO EXIT MAGNETIC DOOR LOCK EXIT BUTTON

- Illuminated button (12/24 VDC)
- Illumination lamp max 60 V 1.2 watts
- Temperature range -20~55
- Contact rating: 5A @ 240 VAC max
- Single pole N.O./N.C. momentary action
- Mechanical life: 1,000,000 cycles min.
- Durable stainless steel plate
- Dimensions: 100x35x24mm

$49.69

SLIM LINE STAINLESS STEEL PUSH TO EXIT MAGNETIC DOOR LOCK EXIT BUTTON

- Illuminated button (12 VDC)
- Illumination lamp max 60 V 1.2 watts
- Temperature range -20~55
- Contact rating: 5A @ 25 VAC max
- Single pole N.O./N.C. momentary action
- Mechanical life: 1,000,000 cycles min.
- Durable stainless steel plate
- Dimensions: 115.3x43.7x38mm
- Back box included

$52.72

SLIM BI-COLOR ILLUMINATED EXIT BUTTON

This exit button is made of chrome acrylic material and incorporates a ring-shaped LED that can light in RED or BLUE mode (BLUE shown in image at left), or both, under control of an external door control device.

- Ultra-slim design

- Intended for surface mount installation

- Brushed-aluminum finish

- Push button N.O. switch

- Waterproof (IP65)

- Built-in over current protection

- LED voltage: 12VDC

- Input voltage: 5-24VDC

- Switch current: 100mA

- Pre-wired with 5-conductor connector

NOTE: Only works in conjunction with ES-AC900, ES-AC950 or ES-AC995 or similar proximity card readers. Cannot be used to directly control or activate a door lock. Dimensions: 44.45mm x 82.55mm x 6.35mm (1.75" x 3.25" x 0.25")

$39.00

WIDE BI-COLOR ILLUMINATED EXIT BUTTON

This exit button is made of chrome acrylic material and incorporates a ring-shaped LED that can light in RED or BLUE mode (RED shown in image at left) or both, under control of an external door control device.
Ultra-slim design

- Intended for surface mount installation
- Brushed-aluminum finish
- Push button N.O. switch
- Waterproof (IP65)
- Built-in over current protection
- LED voltage: 12VDC
- Input voltage: 5-24VDC
- Switch current: 100mA
- Pre-wired with 5-conductor connector

NOTE: Only works in conjunction with ES-AC900, ES-AC950 or ES-AC995 or similar proximity card readers. Cannot be used to directly control or activate a door lock. Dimensions: 69.85mm x 82.55mm x 6.35mm (2.75" x 3.25" x 0.25")

$39.00

Wall Mount Module plus Key Fob Control

This easy to use wireless remote controls two relays, one normally open (NO) and one normally closed (NC)

When you depress the remote button or the wall mount module button, the relay changes state - the open relay closes and the closed relay opens for a predetermined number of seconds adjustable.

Useful for door control electronics like maglocks and electric door strikes.
 

• Wall mount module is removable

• Easy to program and erase pass codes

• Includes handy key fob at no extra charge

• Runs on 12VDC power supply (not included)

$108.33

Quantity:

Passive Infrared Detector

Exit Sensor are Passive Infrared Detector specifically designed for “request to-exit” applications. Detects motion in coverage area and signal an Access control system or door control device.

See Specifications

$97.95